FREE SHIPPING on most web orders over £100 of UK manufactured products to mainland

UK +44 (0) 203 290 8399 or International +357 97 869349

Sale!

TEM Dual Cast S-VISION 130HU

11,559.00 9,247.00

130W rms / 220W p.s. Transmitter

S-VISION Series represents the state of the art of the worldwide TV transmitter technology.

SKU: 130W rms / 220W p.s. Transmitter Categories: ,
Brands: TEM

Description

S-VISION Series represents the state of the art of the worldwide TV transmitter technology. In a compact solution only 1 RU, it covers a power range up to 130W rms / 220W p.s. and supports DVB-T/H / T2, ISDB-T/Tb, DAB/DAB+/T-DMB, ATSC, PAL and NTSC modulations. Of course, Dual Cast analog and digital configuration is also supported.

Additional information

Weight 7.5 kg
Main Category for SEO

0

Robots Meta Tag

0

Main Store for Canonical Url

0

video

0

Product can be split into multiple boxes

0

Color

Black

features

Compact 1U 19 Rack chassis
Output Power up to 130W rms in digital or up to 220W p.s. in analogue
High efficiency broadband amplifier technology
DVB-T/H/T2, ISDB-T/Tb, DAB/DAB+/T-DMB, ATSC, PAL, NTSC modulations fully supported
Embedded Re-Multiplexer/Layer Combiner/TS to BTS (188 to 204 byte) converter for ISDBTb
Adaptive pre-correction circuits
Powerful echo canceller when OneDriver is used as an on-channel repeater
Optional high-performance additional echo cancellation circuit
On-board high stability GPS / GLONASS receiver with battery
Flexible input interfaces:- 4 x ASI inputs (TS, BTS, T2MI, SMPTE-310M) + Analog input- 2 x ASI inputs and 2 x Gigabit Ethernet- 1 x DVB-S/S2 Satellite Receiver input- 1 x RF input
SNMP, Web Interface and Touch Screen display

specification

TRANSMITTERS

UHF digital output power:
30 W, 50 W, 80 W and 130 W rms @ MER 40 dB typ.

UHF analogue output power:
50 W, 100 W, 220 W p.s.

VHF digital output power:
up to 100 W rms @ MER 38 dB typ.

VHF analogue output power:
220 W p.s.

Frequency agility:
UHF Band IV and V or VHF Band III

Frequency resolution:
1 Hz

Pre-correction:
Adaptive

RF connector:
N(f), 50 Ohm

MODULATOR

DVB-T/-H/-T2
 

Standard:
EN300744, EN302304, EN302755, TS101191, TS102773 (T2-MI), TS102034

Inputs:
4x ASI BNC (f), 75 Ohm or 2x ASI BNC (f), 75 Ohm and 2x RJ45 TS oIP 10/100/1000

 
Switch seamless between ASI inputs.

 
Hierarchical and not hierarchical (DVB-T)

FFT:
1K (DVB-T2), 2K, 4K, 8K, 8K ext. (DVB-T2), 16K & 16K ext. (DVB-T2),  
32K & 32K ext. (DVB-T2)

Code rate:
All modalities available according to the standard

 
Block Short or Normal (DVB-T2)

 
DVB-T: Reed-Solomon (204, 188)

 
DVB-T2: BCH, LDPC

Guard interval:
1/32, 1/16, 1/8, 1/4, 19/256 (DVB-T2), 19/128 (DVB-T2), 1/128 (DVB-T2)

Constellation:
QPSK, 16QAM, 64QAM, 256QAM (DVB-T2). Rotated and non rotated (DVB-T2)

MISO processing:
Supported

 
 

ISDB-Tb
 

Standard:
ABNT NBR 15601, ABNT NBR 15603

Inputs:
4x ASI TS/BTS BNC (f), 75 Ohm or

 
2x ASI TS/BTS BNC (f), 75 Ohm and 2x RJ45 TS/BTS oIP 10/100/1000

FFT:
Mode 1 (2K), Mode 2 (4K), Mode 3 (8K)

Code rate:
1/2, 2/3, 3/4, 5/6, 7/8

Guard interval:
1/4, 1/8, 1/16, 1/32

Hierarchical modulation:
Up to 3 layers

Constellation:
QPSK, 16QAM, 64QAM

Time interleaver:
Fully supported

Partial reception:
Supported

 
 

DAB/DAB+/T-DMB
 

Standard:
EN 300401, ETS 300 799

Inputs:
4x ETI (NI[G703], NA5376[G704] or NA5592[G704]) BNC (f), 75 Ohm

Transmission modes:
Mode I, II, III, IV (Automatically detected from the ETI stream, or user selectable)

Operation:
MFN or SFN operations

 
 

ATSC
 

Standard:
A/53, A/110

Inputs:
4x ASI / SMPTE-310M BNC (f), 75 Ohm or

 
2x ASI / SMPTE-310M BNC (f), 75 Ohm and 2x RJ45 TS oIP 10/100/1000

Modulation:
8-VSB

Input bit rate:
19.39 Mbit/s

Bandwidth:
6 MHz

Max processing delay:
Up to 1 second (programmable)

 
 

Analogue
 

Standard:
B, G, D, K, M, N, I

Inputs:
Video BNC (f), 75 Ohm, audio Tini-QG “Mini XLR”, 6 Pin (m), 600 Ohm

Color system:
PAL, NTSC

SATELLITE RECEIVER (Option)

Standard:
ETSI EN 300 421 (QPSK) (DVB-S)

 
ETSI EN 302 307 (QPSK, 8PSK, 16APSK) (DVB-S2)

 
ETSI EN 50083-9 (ASI)

 
ETSI EN 50221 (Common Interface)

DVB-S2:
VCM, CCM, Multi Stream and Single Stream, Normal & Short FEC frames

Symbol rate:
1 – 45 Msym/s (DVB-S)

 
2 – 45 Msym/s (DVB-S2)

Constellation:
QPSK, 8PSK, 16APSK

FEC:
Automatic, all modalities available according to the standard

 
Block Short or Normal

 
DVB-S: Reed-Solomon (204, 188)

 
DVB-S2: BCH, LDPC

Roll–Off:
0.2, 0.25, 0.35

Input connector:
F (f), 75 Ohm

Frequency:
L–band 930÷2250 MHz

LNB control voltage:
Off, +13/18 Vdc, 22 kHz, 0.25 A (overload protection)

RF input level:
40 ÷ 100 db/μV (with attenuator)

Output connector:
BNC (f), 75 Ohm

Modality:
188 bytes

Max input bit rate:
80 Mbps (CAM limit: 72 Mbps)

CAM interface:
PCMCIA DVB-CI Common Interface

CA mode (Conditional Access):
Multicrypt, Simulcrypt

CAS support:
Mediaguard, Viaccess, Irdeto, Conax, BISS with Professional multiprogram

 
CAM (descrambling of up to 24 Elementary Streams) Betacrypt,  
Cryptoworks, Nagravision with standard consumer CAM

 
(descrambling of up to 4 services)

REPEATER/GAP FILLER

RF Input
 

Signal type:
One DTV channel (DVB-T/H/T2, ISDB-T/Tb, ATSC)

Frequency range:
170 ÷ 862 MHz (agile tuning)

Sensitivity:
-75 ÷ -15 dBm

Selectivity:
> 60 dB ± 4.2 MHz

NF (Pi=-50 dBm):
< 6 dB

Conversion type:
Direct Base Band Conversion (Zero IF)

Return losses:
> 15 dB

Connector:
N (f), 50 Ohm

 
 

Echo Canceller
 

Cancellation level:
40 dB, typical

Cancellation window:
20 μs

Selective cancellation window:
1.6 μs (time shift from 2 to 820 μs)

Doppler cancellation:
yes

Maximum echo/signal ratio:
+15 dB (over the main signal), typical

Total delay:
< 10 μs

 
 

Echo Canceller + additional high performance cancellation option
 

Cancellation level:
65 dB, typical (over the main signal)

Maximum echo/signal ratio:
> +35 dB (over the main signal), typical

Maximum echo level at input:
-10 dBm

Max. delay compensation:
200 μs (extendable)

GPS / GLONASS (Option)

Input connector:
N (f), 50 Ohm

Input/Monitor output 10 MHz:
BNC (f), 75 Ohm

Input/Monitor output 1 PPS:
BNC (f), 75 Ohm

Phase noise:
-140 dBc/Hz @ 10 kHz

 
-150 dBc/Hz @ 100 kHz

Stability:
1e-12 / 24 H with disciplined OCXO

Hold-over stability:
5 μs after 5 hours (optional 1 μs after 24 hours)

MECHANICAL

Chassis:
1U rack 19”

Width:
482 mm

Height:
43.6 mm

Depth:
460.5 mm without fans

Weight:
7.5 Kg

CONTROLS

TFT touchscreen
 

Web GUI
 

SNMP
 

GPIO
 

ENVIRONMENTAL

Operating temperature range:
-5°C ÷ 40°C

Max. relative humidity:
90% non condensing

Max. operating altitude:
2500 m. a.s.l. (>2500 m. optional)

ELECTRICAL

Power supply:
Single Phase 100÷240 V~ 50/60 Hz, IEC320 C14 Plug

Maximum consumption:
196 W @ 30 W rms (Onedriver 30U)

 
215 W @ 50 W rms (Onedriver 50U)

 
290 W @ 80 W rms (Onedriver 80HU)

 
470 W @ 130 W rms (Onedriver 130HU)

 
380 W @ 100 W rms (Onedriver 100V)

Ship Separately

0

Brand

TEM

When it comes to quality TEM, (Telecomunicazioni Elettroniche Milano) holds the cup. TEM broadcasting technology company is situated in Binasco, Milano (Italy) and has been creating a legacy since 1977 by a team of specialists in radio communication. Today, TEM is one of the most important players in the international broadcasting field, dealing with the manufacture of different electrical gadgets such as TVs, radios and microwaves. Due to their dedicated team of experts, their technology has evolved to emerge the best in the market. Telecomunicazioni Elettroniche Milano started producing FM transmitters back in 1978. Currently, the transmission is at 40 kW up from 10W, which was the initial output power. All TEM transmitters are completely solid-state with redundant configuration and can be controlled via a remote controller via RS232, RS485 and LAN ports. This offers a wide range of configuration options and flexibility of many connection interfaces. FM transmitters made by TEM come with LD-MOS Technology. This has a direct impact to heat penetration power and enables energy saving by reducing heating time drastically. The production of TV transmitters dates back to 1979, while the first microwave links were installed in 1981 and since today more than 10000 microwave systems were installed in the world. Huge effort has been given to the development of new digital technologies. We supply a wide range of RF systems and RF components for FM & TV transmission such as Filters and Cavities, Combiners and Antenna systems. We TEM supply all necessary accessories (coaxial cables, connectors and adaptors, dehydrators, U-Links, motorized coaxial relays, waveguides and flanges, UPS and AVR) in order to realize complete transmitting systems and assure complete customer needs. We provide also antenna systems solutions and coverage studios, essential for the correct realization of radio and tv stations. We are System Integrator able to provide the most innovative digital FM (DAB-DRM) and TV (DVB-T/T2) solutions.

Reviews

There are no reviews yet.

Be the first to review “TEM Dual Cast S-VISION 130HU”

Your email address will not be published. Required fields are marked *

WP Feedback

Dive straight into the feedback!
Login below and you can start commenting using your own user instantly

TELEVISION TV Transmitters Transmitters - TV Dual-Cast TEM Dual Cast S-VISION 130HU