Receive our regular Special Offers newsletter



Thank you for subscribing!


Multi-Band AM Audio Processor

TRU Price Guarantee

(Subject to conditions)

4,956.00 4,720.00
4,956.00 4,720.00
5,656.00 5,386.00
5,656.00 5,386.00
6,198.00 5,903.00
6,198.00 5,903.00
6,780.00 6,457.00
6,780.00 6,457.00
Tech Support
2-Year Warranty


Do you want your AM broadcasts to sound CLEANER, CLEARER, and LOUDER? Then you need a processor designed and built for today’s AM radio.

Meet Omnia.7AM, a feature-rich, competitively priced AM audio processor engineered to do just that, and the first processor dedicated to AM to appear on the scene in many years.

While competitors are using old and outdated technology in their processors, the Omnia.7AM uses the best of current technology to meet current challenges faced by AM broadcasters. Omnia.7 AM delivers the powerful, clear, and precise Omnia signature sound that’s the first choice of top stations worldwide.

The Omnia.7AM employs most of the features of the 7FM. All aspects of the processing infrastructure, bandwidth, and their output signals, however, have been specially engineered for maximum efficiency and performance within the AM spectrum.

AM Never Sounded This Good.

  • “Undo”, exclusive Omnia technology that removes distortion and mathematically re-creates the peaks sliced from today’s poorly mastered contemporary music. Undo restores life, brilliance, and dynamic range to any type of music.
  • An exclusive Psychoacoustic Controlled Distortion Masking Clipper analyzes and masks distortion perceptible to the human ear, leaving only clean, clear audio.
  • A complete toolbox of sophisticated Omnia sound-shaping technology gives you the power to analyze and refine your signature sound using a variety of sonic tools ranging from Real-Time Analyzers to Oscilloscopes, FFT’s, and more.
  • Remote client software allows full remote control of processor and all metering tools from any Windows-based PC or tablet on the local network — including touch-screen devices.
  • Dry Voice Detector detects speech and applies appropriate processing for clearest possible voice quality.
  • Built-in Speaker Calibration tool.
  • Multiband downward expansion (source noise reduction).
  • Three-stage wideband AGC with adjustable sidechain equalization.
  • Program-dependent two-to-five-band multiband AGCs and limiters.
  • 4.3” / 10.9 cm. front panel screen.
  • Full remote control with audio monitoring.
  • Dual, independent power supplies.
  • Composite pass-through (relay bypass) for backup processor.
  • Asymmetrical output with 150% maximum positive peak modulation, 100% maximum negative peak modulation, and peak inversion controls for the input and output audio.
  • Available with optional HD and/or Streaming.



Frequency Response: 20Hz to 10.0kHz, +/-0.5dB.
Adjustable NRSC pre-emphasis curve implementation. You may instead choose pre-emphasis at 50us or 75us, or even a flat output if desired.
Low pass filter can be set between 3.0kHz and 10.0kHz in 0.5kHz increments. This allows maximum high-frequency transmission while allowing for station-specific bandwidth restriction scenarious such as HD Radio, 9 kHz channel spacing, or even more narrowband shortwave transmission.
Signal-to-Noise Ratio: Greater than -80 dB, de-emphasized, 20Hz to 15kHz
System Distortion: Less than 0.01% THD+N below pre-emphasis, inaudible above
Digital Output Level: Adjustable from -24.0dBFS to 0.0dBFS in 0.1dB increments
A/D Conversion: Crystal Semiconductor CS5361, 24 bit 128x over-sampled delta sigma converter with linear-phase anti-aliasing filter.
Pre-ADC anti-alias filter, with high-pass filter at
D/A Conversion: Crystal Semiconductor CS4391, 24-bit, 128x oversampled
Analog I/O: Two balanced, EMI filtered XLR connectors
AES Digital I/O: AES/EBU In & Out via XLR connectors,
Input accepts 32000 – 96000 Hz. Output is 44100 or 48000 depending on the rate selected in software. AES Reference Input via BNC connector. Accepts 44100 or 48000 Hz only, and the correct rate must first be selected in the software.
Power Requirements: 100-264 VAC, 47-63Hz autosensing, 100W maximum
Power Connector: IEC male, detachable 3-wire power cords supplied
Power Supply: Internal dual redundant


Operating: 0 to 50 degrees C
Non-operating: –20 to 70 degrees C.

Physical Specifications

Unit weight: 11 pounds
Total shipping weight: 15 pounds.
Dimensions: 2RU at 3.5″ H x 19″ W x 12.5″ D

Omnia 7AM Brochure


There are no reviews yet.

Be the first to review “Omnia.7AM”

Your email address will not be published. Required fields are marked *