Distribution Amplifier and Mixer
The RB-DA4x5 is a 1U rack-mount combined distribution amplifier and mixer. It has 4 mono analogue audio inputs on female XLR and 4 groups of 5 outputs on 15 way D-type connectors. Each output group has a five way front-panel DIP switch assigned to it which is used to select the input(s) to send to the output group. This enables each of the four inputs, or a 1kHz 0dBu tone, to be mixed to the output group.
- 4 input, 20 output distribution amplifier.
- Audio prescence LED’s for inputs or outputs.
- Balanced I/O that can be wired unbalanced.
- Outputs a 1kHz test tone e.g to check transmission lines.
The inputs and outputs are electronically balanced and can be wired unbalanced. Each input has adjustable gain using a pre-set potentiometer, providing a gain range of -8dB to +18dB. Each output is individually buffered so that a short circuit on one output won’t affect the others. The output gain of each group can similarly be adjusted between -8dB and +18dB using pre-set potentiometers.
The DIP switch settings and gain controls are recessed beneath a front-mounting screw-on cover so that settings can not be accidently altered, for secure applications.
Four bright front-panel signal present LEDs show the levels of either the inputs or the output groups by pressing the AUDIO PRESENCE button. The LEDs will show green illumination from -12db through to 0db, amber from 0db through to +6db and red for inputs and outputs at +6db and over.
RB-BDA4x5 Block Diagram.
|Maximum Input Level:||+28dBu|
|Maximum Output Level:||+28dBu|
|Frequency Response:||20Hz to 20kHz ±0.1dB (600Ω load, ref 1kHz)|
|Input Gain Range:||Adjustable 8dB loss to 18dB gain (channel 1-4 adjust)|
|Output Gain Range:||Adjustable 8dB loss to 18dB gain (group 1-4 adjust)|
|Input impedance:||>20kΩ bridging|
|Distortion:||0.01% THD @ 1kHz, ref +8dBu output|
|Noise:||-100dB unity gain, ref +8dBu output|
|Common Mode Rejection:||>66dB typically|
|Inputs (4 x Mono):||4 x XLR 3 pin female (balanced, can be unbalanced)|
|Outputs (20 x Mono):||4 x 15 way D-type male plug (balanced, can be unbalanced)|
|Mains Input:||Filtered IEC, switchable 110-120V, or 220-240V, fused, 9W max|
|Fuse Rating:||Anti-surge fuse 100mA 20 x 5mm (230VAC) Anti-surge fuse 250mA 20 x 5mm (115VAC)|
|RB-DA4x5:||4 Input, 4 x 5 output distribution amplifier/mixer|
|Dimensions (Raw):||48cm (W) x 15.8cm (D*) x 4.2cm (H) (1U) 19” (W) x 6.2” (D*) x 1.7 (H) (1U)|
|Dimensions (Boxed):||59cm (W) x 27.5cm (D*) x 11cm (H) 23.2” (W) x 10.8” (D*) x 4.3” (H)|
|Weight:||Nett: 1.6kg Gross: 2.2kg Nett: 3.5lbs Gross: 4.8lbs|
|* Note that this product is deeper than standard Redboxes|
TRU Price Guarantee
(Subject to conditions)