PRIMARY APPLICATION: Also High quality at a very attractive price. Almost very ideal for use as transmitters in stand-alone applications. Also Adjustable power output from 10 to 100%. HARDWARE FEATURES: non-deformable and light thanks to the stainless steel chassis. therefore have 2 rack units only. USER-FRIENDLY FEATURES: Four pushbuttons for device interaction and software. It also offers a simple intuitive interface. RELIABILITY/CONTINUITY: APC (Automatic Power Control) and Foldback protection ensure reliable. operation under any operating conditions. AUDIO PERFORMANCE: Low distortion and also have intermodulation values. and also having a high noise/signal ratio. OPERATING EFFICIENCY: That provides the efficiency for enhanced energy saving. And also environmental protection. As a result, added to LD-MOSFET technology to check high efficiency also. INTERFACE CONTROL: total control to microprocessors. And also easily programmed. from the menu and also with all key parameters displayed on LCD. RDS APPLICATION: built-in RDS encoder with UECP standard functions (option). REMOTE CONTROL: built-in telemetry system by GSM modem. and also from WEB/SNMP (option). REGULATORY COMPLIANCE: The state-of-the-art technology is almost full compliance with EC. FCC and CCIR standards.

TEX1002LCD FM Transmitter 1000 watt

The TEX1002LCD FM Transmitter 1000 watt Stereo NEW TEX1000 Light Transmisor by RVR Elettronica. Therefore the digital operation is quick and almost easy to install. The TEX series stays on the air. also under extreme VSWR conditions. All TEX-series transmitters are equipped with a stereo coder. This 2U TEX1002 LCD/S is also supplied with a clear display. Therefore shows information regarding power. frequency, measurements, and even more. So output power is adjustable from 10 to a maximum of 1000 watts. rather FOLD-BACK function ensures a constant output power.probably under any VSWR condition also. certainly, so the TEX1002 LCD/s can be supplied. and even also with integrated telemetry. while also SMS alarm through an internal GSM modem. and also with battery and charger. At an additional cost. RDS can be integrated.


  • Frequency Range: FCC - CCIR - OIRT - JPN - CHN
  • Rated Output Power: 1000 W
  • Modulation Type: Direct Carrier Frequency
  • Operational Mode: Mono, Stereo, Multiplex
  • Environmental Working Conditions: 10 °C (R.S.L.) / 95% relative Humidity non condensing
  • Frequency Programmability: From software, with 10 kHz steps
  • Frequency Stability: WT from -10°C to 50°C = ±1 ppm
  • Modulation Capability: 150 kHz Stereo, 180 kHz Mono/MPX
  • Pre-emphasis Mode: 0 µS, 50 µS (CCIR), 75 µS (FCC)
  • Power Requirements
  • AC Supply Voltage: 230 VAC ±15%
  • Active Power Consumption: 1420 W
  • Overall Efficiency: Typical 70 %
  • Connector: VDE IEC Standard Mechanical Dimensions
  • Physical Dimensions:L x H x W = 483 mm x 88 mm x 516 mm
  • Weight:about 11 kg
  • Cooling:Forced, with internal fan
  • Acoustic Noise:< 75 dBA
  • Audio Inputs
  • Left/Mono & Right:10 kOhm or 6000hm (XKR F) Level:-13 to +13 dBu
  • MPX:10 kOhm or 50 Ohm (BNC) Level: -13 to +13 dBu @ 75 KHz FM
  • SCA/RDS:10 kOhm (2x BNC) Level: -8 to +13 dBu @ 75 KHz FM
  • AES/EBU (OPTIONAL):110 Ohm (XLR F)
  • Outputs
  • RF Output:50 Ohm (7/8 EIA flange type)
  • RF Monitor:50 Ohm (BNC) approx. -60 dBc
  • Pilot Output:>5 kOhm (BNC) approx.1Vpp
  • Fuses
  • On Mains2 External fuse F 10 A - 6x30 mm


There are no reviews yet.

Be the first to review “RVR TEX1002LCD”

Your email address will not be published. Required fields are marked *

TRU Price Guarantee

(Subject to conditions)

Tech Support

2-Year Warranty

2,962.00 2,353.00

Related products