Contact us on [email protected] UK +44 (0) 203 290 8399 or International +357 97 869349
X
  • 10% FIRST ORDER DISCOUNT
  • Receive our regular Special Offers newsletter

    x

    THANK YOU!

    Thank you for subscribing!

    Select Page
    RigExpert AA-30
    HF ANTENNA ANALYZER 0.1-30MHz
    rigexpert-aa-30

    TRU Price Guarantee

    (Subject to conditions)

    £180.00
    £180.00
    Total: £0.00
    Tech Support
    2-Year Warranty

    Product Description

    RigExpert AA-30 are powerful antenna analyzers designed for testing, checking, tuning or repairing antennas and antenna feedlines.

    Graphical SWR (Standing Wave Ratio) and impedance display are key features of these analyzers which significantly reduce the time required to adjust an antenna. Easy-to use measurement modes, as well as additional features such as connection to a personal computer (to plot Smith diagrams, etc.), make RigExpert AA-30 attractive for professionals and hobbyists.

    • Rapid check-out of an antenna
    • Tuning an antenna to resonance
    • Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
    • Making coaxial stubs or measuring their parameters
    • Cable fault location
    • Measuring capacitance or inductance of reactive loads

    Specification AA-30

    Frequency range: 0.1 to 30 MHz
    Frequency entry: 1 kHz resolution
    SWR measurement range: 1 to 10
    SWR display: numerical or easily-readable bar
    R and X range: 0…1000, -1000…1000 in numerical mode,
    0…200, -200…200 in graph mode
    Display modes: SWR at single or multiple (AA-54 only) frequencies
    SWR, R, X, Z, L, C at single frequency
    SWR graph, 100 points
    R, X graph, 100 points
    Connector type: UHF (SO-239)
    Output signal shape: rectangular, 0.1…10 MHz (AA-30) or 0.1…10.8 MHz (AA-54). For higher frequencies, third or fifth (AA- 54) harmonics are used.
    Output power: about + 13 dBm (at 50 Ohm load)
    Power: Two 1.5V, alcaline batteries, type AA *
    Two 1.2V, 1800…2700 mA·h, Ni-MH batteries, type AA *
    Max. 3 hours of continuous measurement, max. 2 days in stand-by mode when fully charged batteries are used
    When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources
    Interface: 133×64 graphical backlit LCD
    6×3 keys on the water-proof keypad
    AA-54: multilingual menus and help screens, AA-30: menus and help screens in English language
    USB connection to a personal computer
    Dimensions: 22·10·3.6 cm (9·4·1.5”)
    Operating temperature: 0…40 °C (32…104 °F)
    Weight (including batteries): 400g (14 Oz)

    Reviews

    There are no reviews yet.

    Be the first to review “RigExpert AA-30”