Orban OPTICODEC 7600

The Opticodec 7600 has been designed and engineered by our German Engineering team from the ground up with the objective to serve the broadcasters reliably 24/7/365 under all conditions. We have succeeded with our goal, Broadcasters and Telkom providers across the world are broadcasting without fail thanks to the Opticodec 7600.

The Opticodec 7600 is fully DSP based and because we do not use PC processors the unit runs cool under all conditions. No forced cooling required. Opticodec 7600 is equipped with XLR based analog and digital I/O, ISDN interface and Ethernet 10/100BaseT. Optional RS232, up to 3 ISDN interfaces, 2nd Ethernet, X.21/V.35 and GPI.

Configuration and operation through the front panel or by the standard supplied program Orban NetControl which can also be used to configure monitor and connect and configure any Opticodec connected to the network.The Opticodec 7600 distributes audio over all modern communication networks such as ISDN, X.21/V.35, Intranet and Internet. We support SIP/RTP and SIP is fully compliant to EBU TECH 3326. For streaming applications we support RTSP.

Modern codecs should support codec algorithms such as AAC-LC / AAC-HE / AAC-HEv2, enhanced apt-X (16/24 Bit), Linear 8 – 24 bits, MPEG L2 and L3, G.711, G.722 with H.221 and SRT as well as Opus. You will be pleased to know we have made all of these codecs available. Once the Opticodec has been plugged in and set-up you will never have to think about it again. If you consider that the Opticodec is manufactured in Germany to the highest possible standards, the software is reliable (bullet proof) and that the unit can be configured remotely to fulfill your audio broadcast requirements you need to look no further.

  • Multifunctional Keypad

  • Customizable Direct Dial Keys for algorithms

  • Cursor Positioning: Up, Down, Left, Right

  • Numeric Keypad, Help, Redial, Quick Dial, Hang Up

  • Display Contrast and Headphones Loudness Adjustment

We currently support the following algorithms:

  • G.711

  • G.722

  • MPEG 1 Layer II and III

  • MPEG 2 Layer II and III

  • Linear 8, 12, 16, 20 and 24 bits

  • 4SB ADPCM (AETA standard)

  • Enhanced apt-X (16/24)-Bit (optional, IP only)

  • AAC-LD/AAC-LC/HE-AAC (optional, IP only)

  • Opus (optional, IP only)

The new 7600 is one of the easiest codecs to work with, whether you are using only the front panel control, or our NetControl remote software.

Everything is straight forward. Simplicity comes first!

Description

Fully duplex audio codec with ISDN and Ethernet 10/100-Base T-connection for remote control and the possibility to distribute audio over networks such as Intranet, ATM, etc. TCP for point-to-point and point-to- multipoint connections, UDP for Broadcast and Multicast modes. Additionally, an X.21 or V.35 interface as well as optionally up to three ISDN interfaces or mixed with POTS interfaces. Configuration and operation directly with the keypad. High resolution graphical display.

Dimensions: 19", 2 U, depth: 380 mm, weight: approx. 6 kg, no fan. Power Supply: 90 ... 240 V AC, 50 - 60 Hz, 0,28 ... 0,13 A, max. 25 VA Algorithms: ISO/MPEG 11172-3 Layer 2 (MUSICAM) MPEG 1 & 2 ISO/MPEG 11172-3 Layer 3 MPEG 1 & 2 4SB ADPCM (optionally; in mono or stereo) ISO/MPEG 13818-7 AAC MPEG2 (optional, IP only) ISO/MPEG 14496-3 AAC MPEG4 (optional, IP only) ISO/MPEG 14496-3 AAC HE (optional, IP only) ISO/MPEG 14496-3 AAC HEv2 (optional, IP only) Enhanced apt-X 16-Bit (optional, IP only) Enhanced apt-X 24-Bit (optional, IP only) Opus (optional, IP only) Linear 8, 12, 16, 20 and 24 bits (in mono and stereo) G.711 G.722 with H.221 and SRT Transmission Rates: Ethernet: 8 ... 2304 kbps. ISDN: n x 64 kbps (n=1 to 6). X.21: 8, 16, 24, 32, 40, 48, 56, 64, 80, 96, 112, 128, 144, 160, 192, 224, 256, 320 or 384 kbps. Audio Modes: Mono, Dual Mono, Stereo, Joint Stereo Sampling Frequencies: 16, 22.05, 24, 32, 44.1, 48, 64, 88.2 and 96 kHz. Analog Audio Interfaces: Input: 24 bit, adjustable level range from -4 to 21 dBu, impedance >10 kΩ / 600 Ω. XLR-type female. Output: 24 bit, adjustable level range from -4 to 21 dBu, impedance <50 Ω. XLR-type male. Digital Audio Interfaces:

AES/EBU input and output according to IEC 958 prof. Format. External Sync:

  • DISABLED (Word clock is generated from the ISDN transmission clock)

  • DIGITAL IN (Word clock is generated from the AES input signal)

  • SYNC IN (Word Clock is taken over from the SYNC IN)

Sample Rate Converter: (Standard for input and output): 32, 44.1, 48 kHz, 64, 88.2 or 96 kHz. Ancillary Data: 0, 1200, 2400, 4800, 9600 baud Alarm/Control Interface: 8 bit optocoupled bidirectional alarm port and additional RS232 for remote control or ancillary data. X.21 or V.35: Serial transmission interface (8 .. 384 kbps) PC Remote Control: With RS232 or USB Full speed. NETControl software for the remote control of one or more OPTICODEC 7600 units over the 10/100 BaseT interface using a PC. Headroom Adjustment: Via menu from 0...20 dB Frequency Response: 20 Hz to 20 kHz, +0.5/-1 dB. Signal to Noise Ratio: Weighted >80 dB, unweighted >85 dB. Distortion (THD+N): (With a 20 kHz filter, to f=5 kHz) at maximum level <0.06%. Crosstalk Attenuation: (ratio) at 1 kHz > 100 dB Phase Error: <1.5 degree ISDN Interface: RJ45 for S0 connections and RJ11 for U connections. ISDN S0-Extension: 'Plug In' module for master board. Extendible up to 3x S0 and 3x U. ISDN Synchronization:

  • Bonding for MusicTAXI

  • Sync for CDQPRIMA, CDQ2000 and Telos Zephyr in Stereo (Layer 2), 64 & 128 kbps

  • Sync for Telos Zephyr in Stereo

  • (Layer 3), 64 & 128 kbps

  • AETA Sync for 4SB ADPCM (optionally)

  • No Sync / No Sync Inverse

  • G.722/H.221 / G.722/SRT

  • AUTO

POTs Interface: For analog telephone lines. ISDN Setting: Selectable via menu:

Own number for operation at private exchange

  • (sent during connection establishment)

  • SPID number for operation on U.S. networks

  • Accept incoming calls (telephone and MPEG):

  • ALWAYS / NEVER / ASK

  • Accept incoming calls:

  • own number (MSN) check YES / NO

Connection Establishment: Selectable via menu:

  • "Directory" using built-in telephone book with 96 entries

  • "Quick Dial" using entry number

  • "Manually" using numeric keypad

Connection Monitoring:

Online menu displays:

  • Peak Level Tx (send)

  • Peak Level Rx (receive)

  • IP address / ISDN number of connection

  • Encoder configuration

  • Decoder configuration

  • Selected headroom setting

  • Decoder SYNC of remote unit

  • On-line connection time

Telephone Directory: 96 entries can be configured individually:

  • Name

  • IP address / ISDN number

  • Audio configuration

  • Type of Ethernet Connection (Point-to-point, Transmit, Receive [Broadcast/Multicast])

  • ISDN SYNC mode

Software Download:

From our ftp Server or from the CD-ROM on the PC over the RS232/USB/Ethernet. All technical information may be subject to change without further notice.

Reviews

    There are no reviews yet.

    Be the first to review “Orban OPTICODEC 7600”

    Your email address will not be published. Required fields are marked *

    TRU Price Guarantee

    (Subject to conditions)

    Orban OPTICODEC 7600

    Call for Price

    Tech Support

    2-Year Warranty

    Call for Price

    Related products
    STUDIO Orban OPTICODEC 7600