FREE SHIPPING on most web orders over £100 of UK manufactured products to mainland

UK +44 (0) 203 290 8399 or International +357 97 869349



3,966.00 3,847.00

Broadcast Audio Processor

Omnia.7 delivers the powerful, clear and precise Omnia signature sound that’s the first choice of top stations worldwide.

SKU: Omnia.7FM Audio Processor Categories: , , , ,
Brands: Omnia


Up to now, there have been two choices when it comes to audio processing:  all the features and advanced audio-shaping tools (with a five-figure price tag), or gear that fit your budget — but made you compromise on performance and capabilities.

No more compromises: meet Omnia.7, the premium, feature-rich FM audio processor that’s surprisingly affordable. But low price doesn’t mean low performance: Omnia.7 delivers the powerful, clear and precise Omnia signature sound that’s the first choice of top stations worldwide.

Omnia.7 comes with a host of standard features:

– “Undo”, exclusive Omnia technology that removes distortion and mathematically re-creates the peaks sliced from today’s poorly mastered contemporary music. Undo restores life, brilliance and dynamic range to any type of music.

– An exclusive Psychoacoustic Controlled Distortion Masking Clipper analyzes and masks distortion perceptible to the human ear, leaving only clean, clear audio.

– A complete toolbox of sophisticated Omnia sound-shaping technology gives you the power to analyze and refine your signature sound using a variety of sonic tools ranging from Real-Time Analyzers to Oscilloscopes, FFT’s and more.

Optional simultaneous HD, Internet streaming / encoding and RDS options are also available, putting Omnia.7 head-and-shoulders above any other comparably priced audio processor in features, performance and value.

Additional information

Weight 6.8039 kg

Selectable FM or Digital (HD/DAB/Streaming) Standard, Optional upgrade to simultaneous FM+Digital+Streaming.

Omnia-exclusive “Undo” Audio Restoration Technology.

Psychoacoustically Controlled Distortion Masking FM Clipper.

Two-band final look-ahead limiter for HD Radio and Streaming.

Full Omnia Toolbox, with a digital oscilloscope, an FFT spectrum analyzer, and Real Time Analyzer (RTA).

Remote client software allows full remote control of processor and all metering tools from any Windows-based PC or tablet on the local network — including touch-screen devices.

Dry Voice Detector detects speech and applies appropriate processing for clearest possible voice quality.

Built-in Speaker Calibration tool.

Multiband downward expansion (source noise reduction).

Three-stage wideband AGC with adjustable sidechain equalization.

Program-dependent two-to-five-band multiband AGCs and limiters.

4.3” / 10.9 cm. front panel screen.

Full remote control with audio monitoring.

HTTP push support for automation such as dynamic RDS and streaming song titles, with preset recall.

Dual, independent power supplies.

Composite pass-through (relay bypass) for backup processor.





Frequency Response
+/-0.5dB 20Hz to 15kHz, 16.5kHz in extended mode

Signal to Noise Ratio
Greater than -80dBu de-emphasized, 20Hz to 15kHz

System Distortion
Less than 0.01% THD below pre-emphasis, inaudible above

Stereo Separation
65dB minimum, 20Hz to 15kHz, 70dB typical

Digital Output Level
Adjustable from -24.0dBFS to 0.0dBFS in 0.1dB increments

Stereo Baseband Output
Adjustable from -2dBU to +22dBU (0.1dB increments) into 600-Ohms, 20-Ohm output impedance

A/D Conversion
Crystal Semiconductor CS5361, 24 bit 128x over-sampled delta sigma converter with linear-phase anti-aliasing filter.

Pre-ADC anti-alias filter, with high-pass filter at <10 Hz

D/A Conversion
Crystal Semiconductor CS4391, 24-bit, 128x oversampled

Analog I/O
Two balanced, EMI filtered XLR connectors

Stereo Generator Connections
Four 75-Ohm BNC female, two inputs (accepting RDS only), two outputs

Digital I/O
AES/EBU In & Out via XLR connectors, Supports stereo digital audio and Omnia Direct™


Shared RJ45 supporting 100 and 1000 BASE-T Ethernet connections

Input accepts 32000 – 96000 Hz. Output is 44100 or 48000 depending on the rate selected in software. AES Reference Input via BNC connector. Accepts 44100 or 48000 Hz only, and the correct rate must first be selected in the software.

Power Requirements
100-264 VAC, 47-63Hz autosensing, 100W maximum

Power Connector
IEC male, detachable 3-wire power cords supplied

Power Supply
Internal dual redundant

Operating: 0 to 50 degrees C

Non-operating: –20 to 70 degrees C.

North America: Tested to comply with the limits for a class A digital device pursuant to Part 15 of the FCC rules (CFR). Designed for U.S. and Canadian listing with UL.

Europe: Tested for CE and RoHS compliance.

Physical Specifications
Unit weight: 11 pounds

Total shipping weight: 15 pounds.

Dimensions: 2RU at 3.5" H x 19" W x 12.5" D

Ship Separately




Product can be split into multiple boxes





There are no reviews yet.

Be the first to review “Omnia.7FM”

Your email address will not be published. Required fields are marked *

WP Feedback

Dive straight into the feedback!
Login below and you can start commenting using your own user instantly

BROADCAST Audio Processors Omnia.7FM