X
5% FIRST ORDER DISCOUNT

Receive our regular Special Offers newsletter

x

THANK YOU!

Thank you for subscribing!

Inovonics 631

Professional FM Relay Receiver
inovon-631

TRU Price Guarantee

(Subject to conditions)

₤1,457.00 ₤1,385.00
₤1,457.00 ₤1,385.00
₤1,457.00 ₤1,385.00
₤1,457.00 ₤1,385.00
₤ 1,457.00
₤ 1,385.00
Tech Support
2-Year Warranty

View ALL Inovonics Products

Related Products

  • Inovonics 732 Advanced Dynamic RDS Encoder ₤1,833.00 ₤1,741.00
    Winner of RW Best of Show at NAB 2018. The 732 takes RDS to a new level with all the tools
  • BW Broadcast PA1000 V2 BW Broadcast PA1000 V2 ₤3,800.00 ₤3,610.00
    At only 2 RU and about as deep as its wide, the PA1000 V2 breaks all the rules on 1 kW amp
  • Barix New Instreamer MP3 IP Audio Encoder ₤300.00 ₤285.00
    The Instreamer Standard Firmware makes the streaming of audio over IP networks smooth and

Description

Inovonics’ Model 631 is our second generation of frequency-agile, digitally tuned receivers for FM translator and other critical off-air reception applications. Featuring menu-driven access of display and function selections, the 631 provides a switchable IF bandwidth to help solve difficult adjacent-signal problems and readouts of signal strength and multipath distortion to aid antenna alignment. Selectable options and alarms may be remotely controlled or monitored, and high-resolution bargraph readouts give accurate indications of incoming RF and MPX/stereo audio levels.

  • Easy to set-up and use
  • Selectable wide/narrow IF bandwidth
  • Composite/MPX and balanced L/R stereo outputs
  • LCD Display
  • Menu-driven selection of functions and readouts
  • High-resolution bargraph displays indicate:
    • MPX and audio levels
    • Total carrier modulation
    • Left/Right audio levels
    • Incoming RF
    • Multipath distortion
  • Digitally-tuned
  • Carrier-loss and audio-loss alarms
  • Specifications
  • TUNING RANGE:87.5 –108.1MHz in 100kHz steps.
  • ANTENNA INPUT:75-ohm, ‘F’ connector (50-ohm option with ‘N’ connector available).
  • RECEIVER SENSITIVITY:MONO: 10μV for 60dB S/N
  • STEREO: 150μV for 60dB S/N.
  • RECEIVER SELECTIVITY:WIDE: –6dB at ±140kHz
  • NARROW: –6dB at ±80kHz
  • DISTORTION (in MPX or L/R audio):WIDE: <0.2% THD
  • NARROW: <0.6% THD
  • STEREO SEPARATION:WIDE: typ. >40dB
  • NARROW: typ. >20dB
  • COMPOSITE/MPX OUTPUT:Unbalanced, 75-ohm BNC; adjustable between 2V p-p and 6V p-p at ±75kHz carrier deviation.
  • OVERDEVIATION LIMITER:An internal clipping circuit limits the MPX output to a maximum level equivalent to ±100kHz carrier deviation.
  • PROGRAM LINE OUTPUTS:Left/Right active-balanced XLR outputs deliver +4dBm at ±75kHz deviation.
  • Frequency response ±0.5dB, 20Hz–15kHz
  • de-emphasis set by internal jumpers to 75μs or 50μs.
  • LOW-SIGNAL MUTINGComposite/MPX and L/R audio muted when incoming RF falls below the user-programmed LOW-SIG level.
  • AUDIO LOSS ALARM:Responds to loss of either stereo channel; alarm delay is user-programmable between 5 seconds and 4 minutes.
  • FAULT INDICATORS:Front-panel LCD indication of low incoming RF or loss of program audio. Open-collector NPN transistor switches enable remote alarm indication via rear-panel terminal strip.
  • POWER REQUIREMENTS:105-130VAC and 210-260VAC; 50/60Hz; 20W.
  • SIZE AND SHIPPING WEIGHT:23” x 16” x 2” (2U); 8 lbs
  • 584mm x 406mm x 51mm ; 3.6 kg

Inovonics 631 Datasheet

Reviews

There are no reviews yet.

Be the first to review “Inovonics 631”

Your email address will not be published. Required fields are marked *