Contact us via E-mail UK +44 (0) 203 290 8399 or International +357 97 869349
X
  • 10% FIRST ORDER DISCOUNT
  • Receive our regular Special Offers newsletter

    x

    THANK YOU!

    Thank you for subscribing!

    Select Page

    Glensound GS-CU004

    Mic & Headphone Amp
    glensound-gs-cu004

    TRU Price Guarantee

    (Subject to conditions)

    672.00 605.00
    672.00 605.00
    List Price: 672.00 605.00
    672.00 605.00
    Tech Support
    2-Year Warranty

    Description

    Inputs
    The main input is switchable between mic, mic+12v phantom power, and line. The input has an adjustable gain control to meet a wide range of dynamic, condenser, and ribbon microphones. The input passes through a broadcast quality compressor/limiter circuit designed to manage the peaks of excited commentary.

    Outputs/Talkback
    There are two output circuits. One is used as the main programme audio, the other as a talkback circuit. There are separate button controls for each of these using Config+. They can each can be independently configured for latching or momentary, with the programme button also having a ‘cough’ feature. Both outputs are transformer balanced.

    Monitoring
    There are two monitoring inputs each with independent level control. Each of these inputs can be switched from the left ear, right ear, or both ears. There is a 4 LED level meter from -6 to +6 dB.

    Power
    Battery power is from 1 x 9v PP3, or an external DC power supply.The GS-CU004 is often used as a remote link to the main commentary unit. It is favoured by pitch side interviewers, and is popular in combinations with wireless systems.

    • Complete commentary functionality in a small belt pack format
    • Main mic/line input is electronically balanced on XLR with adjustable gain control
    • Input is switchable from line, mic, or mic + 12v phantom power
    • Headphone output on 6.35mm jack socket
    • Two outputs: one for main programme audio, one for talk back circuit, are both transformer balanced
    • Independently configurable buttons for both outputs using Config+: latching, momentary or lazy
    • Two inputs for headphone monitoring on XLR, both with adjustable level
    • Headphone inputs have left/both/right switching
    • Belt clip
    • Battery powered via 1 x 9v PP3, or via external 12v DC
    • Maximum Dimensions (excluding belt clip): 153 mm x 104 mm x 43mm
    • Weight (excluding battery): 355g

    Specifications:

    MIC INPUT GAIN: -44dBu to –67dBu
    MIC+ PHANTOM PWR GAIN: -36dBu to –59dBu
    LINE GAIN: -1dBu to –24dBu
    EQUIVALENT INPUT NOISE: 119dBu (22-22KHz RMS gain @ max) Input terminated with 300 Ohms
    FREQUENCY REPONSE (Mic-Line): 50Hz to 20KHz <-1dBu
    PHANTOM POWER: 12 Volt Phantom power (P12L)
    COMPRESSOR/LIMITER: Threshold approx Line up Compressor 3:1 ratio (approx)
    THD+NOISE: < 0.25% (50Hz to 20KHz)
    PPM METER: 4 x LEDS (–12,-6,0,+6 dBu with reference to prog out)
    PGM & TB OUTPUT IMPEDANCE: 50 OHMS Transfomer balanced
    FB & CUE INPUT IMPEDANCE: > 80K Ohms Electronically balanced
    FB & CUE INPUT GAINS: FB & CUE INPUT GAINS
    HEADPHONE ROUTING FB & CUE: inputs switchable to either or both ears
    HEADPHONE LEVELS: Max +18dBu with 600 Ohms *****Warning high headphone levels can be harmfull to your hearing *****
    OPERATOR SIDE TONE: Fixed @ -10dBu with reference to output send level
    HEADPHONE CONNECTOR: A or B gauge jack
    HEADPHONE IMPEDANCE: 200 to 2000 ohms
    POWER: Internal: 1 x PP3 9 volt battery
    External: 12 to 20V @ < 80Ma 2.5 mm Jack (inner positive)
    BATTERY LIFE: BATTERY INDICATOR Steady blue LED indicates good battery
    Flashing blue LED indicates low battery
    OVERALL SIZE: 43 x 153 x 103 mm (H x W x D)
    UNIT WEIGHT: 355 Grams (including battery)

    Glensound GS-CU004

    Reviews

    There are no reviews yet.

    Be the first to review “Glensound GS-CU004”

    Your email address will not be published. Required fields are marked *

    *