The 2U line maximizes the concept of energy efficiency, compactness and reliability that have steered the design over the past ten years. All the transmitters in this line are extremely compact and light, which makes for easier installation and lower transportation costs.
The high energy efficiency also allows for a much lower operating cost.
Because of intelligent protocols, Icefet technology, and Lifextender algorithms this product line is also characterized by extremely high reliability and high performance even under extreme operating conditions due to intelligent safety protocols, Icefet technology, and Lifextender algorithms.
The intelligent protocols are activated proportionately to the harshness of the environmental condition, thus guaranteeing the maximum power output in respect to the safety of the equipment.
The model ETG 500.5 Photovoltaic can also operate with a DC power supply of 48VDC (operating range 40-56 VDC), designed for operation with renewable energy sources such as wind and/or solar.
|Dimensions||59 × 49 × 9 cm|
Output Nominal Power 1000 W adjustable
Operating band 87.5 ÷ 108 MHz
RS232/RS485 Yes. Connector DB9 female
Points of measure RF Sample – MPX Monitor
Displayed Parameters More than 50 parameters displayed on a wide graphic 0-LED screen
Adjustments From the frontal panel through OLED/from PC
Number of L-DMOS in amplifier stage 2
RF power stage technology ICEFET & ECOSAVING
Dimensions: Rack units 2 RU
Dimensions: W – H – D 48.5 – 8.5 – 58.5 cm / 19.11 – 3.35 – 23.05 inches
Weight 13.2 Kg / 29.1 lbs
Number of cooling fans 3
RF output connector 7/16” DIN Female
MPX BNC Female
LEFT & RIGHT XLR Female
AES/EBU XLR Female
AUX BNC Female
Monitor/19 kHz BNC Female
Output impedance 50 Ω
Automatic power RF control Stabilizes the output power value to the Target power level selected
Overall output power RF stability /- 0,1 dB
VSWR 2:1 at full power. Automatic power reduction beyond 1.7:1. Transmitter is protected fro open and short circuit.
Harmonics < -75 dBc
Out of band emission (spurious) < -80 dBc
MPX input level 15/-10 dBu for 75 KHz standard deviation
MPX level adjustment Soft adjust 0.1 dB steps from front panel
MPX input impedance 5 KΩ selectable
L/R input level 15/-10 dBu for 75 KHz standard deviation
L/R level adjustment Soft adjust 0.1 dBu steps from front panel
L/R Input Impedance Selectable 10 K – 600 Ω, balanced
AES/EBU input resolution 24 bits
AES/EBU input sample rate 32,44.1,48,96 KHz Automatically selected
AES/EBU input level -20 dBFS – 0 dBFS
AES/EBU input impedance 110 Ω balanced
AES/EBU-Analog input automatic changeover Yes
PILOT Amplitude adjustment Soft adjust 0.05% steps from front panel
PILOT Phase adjustment Soft adjust 0.01 degree steps from front panel