X
5% FIRST ORDER DISCOUNT

Receive our regular Special Offers newsletter

x

THANK YOU!

Thank you for subscribing!

DEVA Broadcast SmartGen 3.1

RDS/RBDS Encoder
smartgen-3.1
DEVA Broadcast SmartGen 3

TRU Price Guarantee

(Subject to conditions)

409.00 389.00
409.00 389.00
List Price: 409.00 389.00
409.00 389.00
Tech Support
2-Year Warranty

Description

Reliable, Easy-to-use, Transmitting Excellence (DEVA Broadcast SmartGen 3.1)

DEVA Broadcast SmartGen 3.1 Encoder is a quick and inexpensive way to include an RDS/RBDS. The SmartGen 3.1 transmits basic RDS information such as the Program Service name(PS), Program Identification(PI), Alternative Frequencies(AF) Program Type(PTY). It also supports Decoder Information and Music/Speech flag. USB connectivity makes it easy to program the non-volatile memory using any PC and the supplied Windows® software. After programming, the unit should be disconnected and re-installed on the transmitter site. Though it is not capable of “dynamic” messaging of the song titles, SmartGen 3.1 will identify your station by format. It displays your station’s “street name”, continuously transmitting any station promo or advertising messages to your listeners.

PROGRAMMING SOFTWARE:

Based on our more than 15 years of experience in the RDS field, we develop the SmartGen Basic RDS/RBDS Encoders Manager as a dedicated software for full management of our Basic RDS Encoders range as regards to the latest updates of the RDS/RBDS Standards.

  • Very Attractive Price
  • Very Good Price-Performance Ratio
  • PS & Radio Text Scrolling Options
  • Fully Digital Synthesis of RDS signal
  • MPX Loopthrough & Sidechain Modes
  • Internal or external Pilot / MPX Synchronisation
  • Very Intuitive Windows Configuration Software
  • Proved and reliable hardware for 24/7/365 operating
  • Built-in dedicated 19kHz source for internal sync
  • Works with any FM exciter and stereo generator
  • Supports both RDS & RBDS standards
  • Easy Installation and Setup
  • USB Programming Interfaces
  • Built-in failsafe bypass relay
  • 19″ Case for high RF immunity

Technical Specifications

Power Supply: Internal 100 – 240V; 50 – 60Hz
Pilot/MPX Input: Yes
MPX/RDS Output: 0 to 3199 mV
Inputs/Outputs: No
Communication Port: USB
Synchronization: External (Pilot or MPX) / Internal / Auto
Synchronization Monitoring: No
RDS Level adjustment: with trim pot
Phase adjustment: Yes
Separate outputs for RDS+MPX and for RDS only: No
Command to activate the RDS SCA: No
Side Chain Mode, Loop through mode, Bypass feature: Yes
RDS Subcarrier: 100% Digitally Generated Shape / Bypass: 0 dB
Pilot synchronization: Input Level: -50dBu to +12dBu / Frequency: 19kHz, ±3Hz
EN50067 compliant: Yes
Accurate Clock Time (CT) Sync with Internet Connection: No
Remote TA actuation for Traffic Announcements: No
GPS module for automatic synchronization of the built-in clock: No
Fully independent RDS decoder for self-monitoring purposes: No
Firmware can be upgraded in the field: No
Front-panel LCD displays all programmed data: No
Data may be entered on-site with Front-panel Buttons: No
Operating Temperature: 0°C ÷ 55°C

RDS Features

Group supported: 0A, 2A
Group Sequence: Fixed
PS: 1
PI: 1
PTY: RDS/RBDS
AF Method A: 7
AF Method B: No
RT: Yes, 1 message
RT rate adjustment: Yes
RT+ for songs and content tagging: No
TP: Yes
TA Control: Software
PTYN: No
EON: No
CT: Yes
TMC, EWS, IH, TDC: No
Free Format Groups (FFG): No
Open Data Application (ODA): No
64-character Dynamic PS shown on all RDS/RBDS Radios: Yes
Auto “parses” long messages for best text display: Yes
Scrolling by character: from 1 up to 8
Scrolling by word, Auto centering, Truncate long words: Yes

Communication

Communication Interfaces: USB
Connection with Automation Software: No
Network Connectivity: No
Scheduler: No
Configuration: Software
Password Protection: No
ASCII Protocol: Yes
UDP, TCP, HTTP, SNTP: No
Alert notifications on user-defined events via SNMP traps or E-mails: No
Embedded SNMP agent permitting active management tasks: No
Custom HTML formatted E-mail templates with dynamic variables: No
Supported Network Protocols:: No
UECP Protocol: No
PI <=> CALL Calculator: Yes
Remote Display: No
Supplied with Intuitive Software: Yes
Comes with 2-years Limited Warranty: Yes

Size and Weight

Dimensions (W;H;D): 485 x 44 x 130 mm
Shipping Weight: 540 x 115 x 300 mm / 2.1kg

DEVA Broadcast SmartGen 3.1 Brochure

Reviews

There are no reviews yet.

Be the first to review “DEVA Broadcast SmartGen 3.1”

Your email address will not be published. Required fields are marked *