X
  • 5% FIRST ORDER DISCOUNT
  • Receive our regular Special Offers newsletter

    x

    THANK YOU!

    Thank you for subscribing!

    Contact us via E-mail UK +44 (0) 203 290 8399 or International +357 97 869349

    BW Broadcast TX1000 V2

    Stereo FM Transmitter
    bw-TX1000-V2

    TRU Price Guarantee

    (Subject to conditions)

    4,106.00 3,901.00
    4,106.00 3,901.00
    List Price: 4,106.00 3,901.00
    4,106.00 3,901.00
    Tech Support
    2-Year Warranty

    Description

    At only 2 RU and about as deep as it is wide, the TX1000 V2 breaks all the rules on 1 kW transmitter size. The compact form factor is only one of the reasons this advanced FM transmitter is perfect for your station, it also combines high performance and superb value for those who can’t afford to buy anything but the best. Now with built in 4-band DSPX audio processing, Ethernet control and FSK IDer.

    Radio ‘Pick Hit’ winning V2 FM Transmitters are packed with features to improve sound quality & reliability.

    The TX1000 V2 has integrated multi-band DSPX audio processing that means stations without a dedicated processor sound great, right out of the box. It also has one of the industry’s cleanest exciters and an ultra-low distortion modulator which go to make it a highly stable FM transmission system. Clean, loud, market leading audio performance that will crush the competition.

    With Gold Clamp Transistors and Slide-in Power Supplies on-site repairs have never been simpler. So, should your transmitter fall foul of lightning strikes or power fluctuations, parts can be changed in a couple of minutes and you’re back on air! Slide-in universal power supplies make replacement a breeze. A truly innovative heatsink design ensures ultra-long life, thanks to ingenious airflow.

    We’ve made our transmitters the most intelligent on the market by adding Ethernet Remote Control (click for online demo), Email Alerts, Silence Detection, Advanced Alarms as well as an In-built Logger. All of these features make it easy for you to monitor the status of your transmitter. It will email you if it has a problem and keep a log of any issues to be investigated. You can also adjust settings remotely if required. All these features are designed to give you peace of mind and save you time.

    Configurable Status and Alarm Ports, to signal to, and control external equipment. This will alert you to issues and offer solutions to keep you on air. For example, it can be configured to switch on back-up audio or back-up transmitters should it detect a problem.

    Analogue, Digital and Composite Inputs give maximum flexibility to interface with any existing and future audio chains, alleviating compatibility problems and future proofing your equipment.

    FSK ID Keyer as standard for translators removes the need for external hardware or hourly audible announcements and offers broadcasters a one-box solution for their translator sites.

    Flexible and extensive Web Mail, SNMP, Telnet and Serial Remote Control that will keep you aware and in control of your station’s transmission, and allow you to interact with your transmitter using the method that you prefer.

    • 100 -1100 watts RF output power
    • 45+ miles Transmission range
    • XLR analogue/digital inputs
    • Composite input
    • Stereo encoder
    • Pre-emphasis audio limiter
    • DSPX multi-band processor inside
    • Antenna fault protection
    • VSWR and temp monitoring
    • Slide-in power supplies
    • Gold-clamp transistors
    • RS232 remote control
    • 2 year international warranty

    RF

    • Harmonics:better than -75 dBc
    • Spurious:<-90dBc
    • Frequency range:87.5 – 108 MHz
    • Frequency steps:10 kHz to 50 kHz selectivity
    • Frequency selection:User interface with display or web remote control
    • Frequency control type:Dual speed phase locked loop
    • Frequency stability:<+/- 500 Hz (fine adjustment available)
    • Modulation:Direct frequency modulation
    • Synchronous AM Noise:0.31% (at normal deviation)
    • Asynchronous AM Noise:0.18% (at centre frequency of 97.7 MHz)

    AUDIO & MPX I/O

    • MPX input / output connector:BNC / BNC
    • MPX input / output impedance:1.8kOhm (in) / >600 Ohm (out)
    • MPX input level:-10dB to +10dB (adjustable)
    • MPX input / output response:+/- 0.02 dB, 5 Hz to 100 kHz
    • Audio input connectors:XLR balanced
    • Analog input impedance:10 kOhm
    • AES/EBU sampling rates:32kHz, 44.1kHz, 48kHz, 88.2kHz and 96kHz

    STEREO

    • Subcarrier generation:Microprocessor generated 8x over-sampled
    • Pilot:19 kHz +/- 1 Hz (adjustable)
    • Pilot generation: Microprocessor generated 16x over-sampled
    • Output level:+6dBu (BNC)
    • 15 kHz filtering:80dB at 19kHz (DSP based)
    • Overshoot filter clipping:DSP based
    • Spurious: >80 kHz / >160kHz:> -60dBr / > -80dBr
    • Stereo separation:>50dB (20Hz – 15kHz)

    LIMITER

    • Audio input levels:-10dB to +24dB for level control, DSP auto levelling
    • Audio input connectors:XLR balanced (shielded)
    • Input CMRR:> 60dB
    • Audio distortion:0.05% at limiting 1 KHz (bypass preset)
    • Frequency response:20 Hz to 20 kHz +/- 0.2dB (pre-emphasis off)
    • Processing range:Processing control range 40dB (pre-emphasis off
    • Input impedance:10 kOhm
    • Pre-emphasis:50 μs,75 μs and 0 μs (off)
    • Process modes:Multiple presets

    OTHER

    • User Interface:3 buttons, rotary encoder & 256×64 graphics display
    • External control:I/O Alarms D9-type Male; RS232 D9-Type Female
    • Telnet and Web remote RJ45 Ethernet

    BW Broadcast TX1000 V2 Brochure

    Reviews

    There are no reviews yet.

    Be the first to review “BW Broadcast TX1000 V2”

    Your email address will not be published. Required fields are marked *