X
5% FIRST ORDER DISCOUNT

Receive our regular Special Offers newsletter

x

THANK YOU!

Thank you for subscribing!

BW Broadcast PA300 V2

FM Power Amplifier
bw-PA300

TRU Price Guarantee

(Subject to conditions)

1,972.00 1,873.00
1,972.00 1,873.00
List Price: 1,972.00 1,873.00
1,972.00 1,873.00
Tech Support
2-Year Warranty

Description

Using the same core technology as our FM transmitters, the PA300 V2 300-watt FM RF amplifier is exceptional value for both stations who are on a budget and also demand the best performance. When paired with a BW Broadcast exciter, or other top-quality model, the unique design of the PA300 V2 contributes unsurpassed reliability to low-power FM transmission systems.

Compact, lightweight and efficient, the PA300 V2 has an adjustable output from 25 to 300 watts. Internal harmonic filtering keeps your RF signal clean and compliant with all applicable CE, FCC and EU regulations. Mains voltage input is via an EMI filtered IEC power connector, which feeds two fully approved and efficient switched mode power supply modules with a universal input voltage range from 85-260 Volts AC.

The PA300 V2 has a slide-in power supply allowing the power supply to changed in seconds without the need for any tools. A redundant bay allows you to install a second power supply, so if you suffer with a power surge or lightening strike you transmitter will keep working on full power!

Our unique remote control app can be used on any smart device and allows you to access your BW Broadcast equipment. It can be used to monitor or change settings instantly from wherever you are.

The graphical LCD controller eases the management of power, as well as monitoring of key system variables. The rear panel has a BNC connector for RF input and RF output is via an N-Type socket.

The PA300 is based on a modern MOSFET device that is simple, stable and efficient. High power fans draw fresh air through the transmitter’s heatsink to keep the transistor and amplifier cool. Amplifiers are protected from damage by temperature control systems and antenna fault (VSWR) monitoring which react to faults by reducing the output power to a safe operating level, keeping you on air rather than shutting down completely.

An RS232 control and monitor system can be managed from a standard terminal program or BW Broadcast’s included Windows application.

Need more power? Take a look at the PA600.

  • 30-310 watts RF output power
  • 30+ miles Transmission range
  • Antenna fault protection
  • VSWR and temp monitoring
  • Slide-in & Hot swap power supplies
  • 2 year international warranty

RF

  • Input connector:N-Type 50 Ohm
  • Output Connector:N-Type 50 Ohm
  • Harmonics:better than 75 dBc
  • Spurious:better than 85 dBc
  • VSWR Fold Back:above 2.1

Other

  • User Interface:3 buttons, rotary encoder & 256×64 graphics display
  • External control:I/O Alarms D9-type Male; RS232 D9-Type Female
  • Telnet and Web remote RJ45 Ethernet
  • Size:485mm x 350mm x 90mm
  • Weight:6.8kg
  • Voltage input:100 – 265 VAC
  • Power connector:IEC
  • Switched mode approvals:UL / TUV / CE
  • Power consumption:465W average @ 300W RF
  • Power:30.8W – 310.8W
  • Power supply type:1 x Slide-in / Hotswap
  • Connector:N-type 50 Ohm
  • Approvals:CE/RTTE, FCC certified, IC

BW Broadcast PA300 V2 Brochure

Reviews

There are no reviews yet.

Be the first to review “BW Broadcast PA300 V2”

Your email address will not be published. Required fields are marked *