FREE SHIPPING on most web orders over £100 of UK manufactured products to mainland

Broadcast Radio SRMv2

The SRMv2 is a small, fixed format designed by Broadcast Radio to provide a high level of features in a package that novice broadcasters could easily understand. It is designed to work interactively with the Myriad Playout system but is equally at home working with any playout software.

Its simple layout and colourful design belie the advanced technical features that the mixer offers such as intelligent interaction with Myriad Playout, programmable fader functionality and a built in TBU & VoIP (Skype) channel.
Whilst Broadcast Radio designed the feature set and look of the SRM, the actual electronic design and fabrication was done in partnership with Sonifex so the SRM combines Broadcast Radio’s innovative design with more than 45 years of Sonifex experience building broadcast electronics.
  • User friendly broadcast mixer
  • Clear, simple layout with no jargon
  • Designed for broadcasters with all levels of experience
  • Nine multi-function channel mixer
  • Built in telephone interface
  • Built in USB sound device (ideal for stream encoding or VoIP like Skype or ipDTL)
  • Built in headphone volume limiter
  • Large, simple LED volume display
  • Remote output for fader starts
  • Speaker muting when 'Mics' are on
  • External mic-light switching output
  • 'Program' and 'record' outputs
  • Clean-feed output for external TBU (can also be configured to feed internal sound card with jumper setting)
  • 'Aux' input for iPod or MP3 players
  • Four microphone/line channels
  • Four Myriad channels / line
  • Switchable telephone/AUX channel
  • Connects to Myriad via USB cable
  • Start buttons for Myriad Cart Players
  • Channel lights show Myriad Cart status
  • Rack or flush mountable
  • Stylish black anodised finish
  • Guest headphone 'talkback'
  • Reliable, low cost mixing solution
Key Specifications:
  • 4 x Mic / Line Inputs (inc phantom power on mic channels)
  • 4 x Myriad / Line Inputs
  • 1 x Aux / Telephone Input
  • 1 x Main Output
  • 1 x Record Output
  • Separate Speaker, Presenter Headphone & Guest Headphone Control
  • Built-in Telephone Interface (for use with analogue phone line)
  • Built-in USB sound device for use with VoIP systems (such as Skype and ipDTL)
  • Myriad Intelligent Interface (Myriad 4 / 5 Playout)
Full Specification List: Mic Inputs Audio Specification Input Impedance: > 1k5Ω electronically balanced Input Gain Range: Preset pot +24dB to +67dB ref -50dBu, TRIM pot ± 15dB Frequency Response: 40Hz to 20kHz –1dB, +0dB Mic input E.I.N: -130dB with 150Ω source Phantom Power: +48V to each mic input (SCi selectable) Common Mode Rejection Ratio: > 60dB typically Pan Range: Off/-3dB Centre/Off Stereo Line Inputs Audio Specification Input Impedance: > 20kΩ electronically unbalanced Input Gain Range: +10dB ref 0dBu at PGM output, TRIM pot ± 15dB Frequency Response: 20Hz to 20kHz –0.5dB, +0dB Noise (20Hz-20kHz): -92dBu ref 0dB (fader down, no routing) Total Harmonic Distortion: 0.015% at 1kHz, 0.015% at 10kHz ref +8dBu Balance Range: ± 6dB Outputs Audio Specification Output Impedance: PGM output: < 50Ω electronically balanced REC output: < 75Ω unbalanced Monitor output: < 75Ω unbalanced Headphone output load: > 16Ω, recommended 250Ω Maximum Output: PGM output: +26dBu balancedREC output: Level:+16dBu unbalanced Input & Output Connections Audio Inputs: 4 x Microphone XLR-3 pin sockets 12 x Pair stereo line RCA phono sockets 1 x Pair stereo aux RCA phono sockets 1 x Stereo aux 3.5mm jack socket Audio Outputs: PGM: 2 x XLR-3 pin plug (balanced) REC: 1 x Stereo pair RCA phono sockets Monitor Inputs: 1 x Stereo pair RCA phono sockets Monitor Outputs: 5 x 6.35mm (1/4”) stereo jack sockets (2 x presenter, 2 x guest, 1 x loudspeaker) Remote Outputs: 9 x 6.35mm (1/4”) stereo jack sockets (one per channel) 1 x 6.35mm (1/4”) stereo jack socket for light control Telephone: 2 x RJ11 6/4 (1 x line, 1 x handset) USB Audio: 1 x Type-B receptacle USB Serial: 1 x Type-B receptacle Mains Input: Filtered IEC, continuously rated 85-264VAC, 47-63Hz, 45w nominal, 50w peak Fuse Rating: Anti-surge fuse 2A 20 x 5mm Cleanfeed output (channel 9 only) 3.5mm Stereo jack Physical Specification Dimensions (Raw): 48.3cm (W) x 35.6cm (D) x 12.5cm (H) 19" (W) x 14" (D) x 4.9" (H) Dimensions (Boxed): 67cm (W) x 44cm (D) x 25cm (H) 26.4" (W) x 17.3" (D) x 9.84" (H) Cut-Out Dimensions: 44cm (W) x 34.7cm (D) 17.32" (W) x 13.66" (D) Weight: Nett: 8.5kg Gross: 10.12kg Nett: 18.7lb Gross: 22.26lb

Reviews

There are no reviews yet.

Be the first to review “Broadcast Radio SRMv2”

Your email address will not be published. Required fields are marked *

TRU Price Guarantee

(Subject to conditions)

Tech Support

2-Year Warranty

$3,318

Related products
STUDIO Broadcast Radio SRMv2