Broadcast Concepts LPF150
150W FM Low Pass Filter
The Broadcast Concepts LPF150 is a high quality, high performance and competitively price low pass filter for all 50 ohm pallet amplifiers up to and including 150W continuous power.
- 0.30 dB insertion loss maximum; 0.25 dB typical.
- -25dB return loss maximum; -28dB typical.
- ATC 100B Capacitors.
- #14 Awg Inductors.
- -45dB rejection at 176MHz. That's the 1st harmonic of 88MHz
- Size: 2.5 inches wide x 3.75 inches long x 0.625 inch tall.
- Each unit is sweep tested on an HP 8753D network analyzer to meet our specifications
- .25dB maximum insertion loss, better than -25 dB return loss from 88-108MHz.
- RF connectors are not included. A coax can be soldered directly or the product can be installed in an enclosure (customer supplied)
- Mounts to customers chassis with 8-32 or 6-32 screws. PCB standoffs or washers are required between the bottom of the PCB and chassis to prevent shorting of the inductors. Installing the filter in a metal chassis is suggested to provide shielding and good thermal conductivity in high power installations.
- This low pass filter is intended for use in 50 ohm systems only.
TRU Price Guarantee
(Subject to conditions)