Barix Exstreamer 100

The Exstreamer 100 family of products decode IP Audio streams and play out the received Audio signal to amplifiers or speakers. Supporting a large number of protocols, encoding methods and application specific firmware, the products can be used for Broadcast, Internet Radio, as well as VoIP applications. Control and local storage interfaces are device specific to match different use cases.

The Barix Exstreamer 100 is a versatile network audio decoder for a variety of applications. It enables users to create flexible, cost-effective distributed audio systems using standard IP technology. The Barix Exstreamer 100 plays MP3, G.711 and PCM audio files from PC or web server (http) as well as legacy digital and analog sources (using the Barix Instreamer) and streams from sources like Shoutcast, Icecast (Internet radio) or RTP servers (Instreamer).

The Barix Exstreamer 100 provides unbalanced RCA outputs and a headphone jack, along with Ethernet connection and web-browser control. With serial and Ethernet control APIs, it can also be managed from typical automation systems. Installing the Barix Exstreamer 100 is fast and simple due to its unique features, SonicIP and IPzator: On power up the device finds a correct IP address and announces it over the audio and headphone outputs.

• Audio stereo decoder for MPEG1&2 Layer3 (MP3), HE-AAC v2 (AAC+), WMA, Ogg Vorbis,16bit PCM linear and a-law, u-law, 8-48k sample rate support • Streaming support with UDP, RTP, HTTP, Shoutcast, Multicast • 10/100 Mbit Ethernet interface • USB 1.1 interface for flash memory, (FAT16/32 file-system support) • Line level (4.2Vpp), unbalanced, stereo output (RCA) • 3.5mm headphone jack • Audio playback from USB (FAT16/32 filesystem) • Browser based configuration and User Interface • Control Interface via Serial, TCP, UDP, CGI • Wide range power supply input with low power consumption • RS-232 Serial port • IR decoding capability for serial port dongle and internal IR receiver where available
Electrical • 9 to 30 VDC, 12 to 24 VAC, 6 Watt max. • 2.1mm barrel connector Ethernet 10/100Mbps auto, RJ-45 connector with integrated Link/Activity LED Protocols: TCP/IP, UDP, RTP, SIP, DHCP, Multicast capable ES-100/spkr (Ethersound, output, no daisy-chain) support Analog Output Line level output, 40..60 Ohm output impedance on RCA and 1/8" headphone jack. Output level software controllable Full scale output voltage: 5.6 dBu, 4 Vpp Frequency response (-3dB) 19Hz ..22kHz * Dynamic range 87 dB SNR/THD -87 dB, <0.05% Audio formats MP3 CBR/VBR, up to 320kbps, 8..48kHz sample freq. AAC, AAC plus, AAC-HE (AAC plus V2) WMA (up to version 9), Ogg Vorbis PCM 16bit @8, 16, 22.05, 24, 32, 44.1, 48 kHz G.711, uLaw, aLaw (sample rates same as PCM) Discrete I/O 1 NO relay contact, 24V 0.5A (110&120 models only) RS-232 Interface 300..230'400 Baud asynchronous, tunneling or local control Display Backlit LCD, 2x16 chars (110&120 models only) IR Interface IR via serial port, built-in IR receiver (110&120 models only) IR remote control included with Exstreamer 110 & 120 Mechanical Aluminum case, 250g, rack and wall mountable using accessories Dimensions (W x H x D) 108x38x78.7mm (4.25x1.5x3.1 inch) Model comparison Model 100 Memory USB, IR use kit Model 105 Memory MicroSD, IR use kit Model 110 Display 2x16, Memory USB, Relay Model 120 Display 2x16, Memory MicroSD, Relay MTBF Calculated acc. MIL217F at 25°C Exstreamer 100 min. 480 000h Exstreamer 105 min. 460 000h]] Exstreamer 110 min. 450 000h Exstreamer 120 min. 430 000h * depends on used codec, best results @48kHz PCM ** high quality A/D supports only certain sample rates

Reviews

    There are no reviews yet.

    Be the first to review “Barix Exstreamer 100”

    Your email address will not be published. Required fields are marked *

    TRU Price Guarantee

    (Subject to conditions)

    Barix Exstreamer 100

    $197.00

    Tech Support

    2-Year Warranty

    $197.00

    Related products
    STUDIO Barix Exstreamer 100