Showing 1–100 of 180 results
The ASI8921/ASI8821 series are professional PCI tuner adapters designed for use in AM/FM/RBDS/RDS radio broadcast audio monitoring.
Belt-Pack Headphone Amp
The CM-BH4W is a portable, battery powered 4 wire communication unit for use in a multitude of TV and radio broadcasting applications.
Line Powered Telephone Line Listen Unit
The CM-TLL provides a low-loss interface to receive audio from a telephone line.
Stereo Profanity Delay
The RB-PD2 is a stereo audio profanity delay used for live broadcast programs to prevent unwanted or obscene material from being transmitted.
Reference Monitor Controllers
The new Reference Monitor Controllers are a range of 1U rack-mount audio production control units, for providing source selection, volume, DIM and CUT controls for external analogue monitors, together with light controls for the Sonifex SignalLED range of studio signs, or similar.
10 Button Advanced Talkback Intercom, AoIP Portal
Talkback refers to the standard method of communication between broadcast studios.
Stereo Headphone Amplifiers
This range of stereo headphone amplifiers accept balanced-line signals and provide one, two or six separate outputs to drive professional headphones.
Combined A/D and D/A Converter
The RB-ADDA & RB-ADDA2 A/D D/A converters are 1U rack-mount units which produces an AES/EBU or S/PDIF level digital audio output from a balanced XLR or unbalanced phono stereo audio input.
Headphone Pot Box
A very useful and robust pot box that accepts an unbalanced audio input on a single XLR connection.
Automatic Line Alternative
Safety for your transmission network – Automatic modulation source selection device
Network Control Device
The NC06 integrates existing analogue and digital equipment into SNMP TCP/IP structures.
Automatic ‘Best’ MPX Source Selector
The ALA-MPX enables you to simply monitor and compare up to four MPX signals (out of different sources or feeding systems) that get supervised and automatically switched following defined criteria in case of failure.
IP Extender for GPIO & Analogue Control Signals
The RB-IPE is a 1U rackmount unit designed to provide remote control of GPIO and analogue control voltages over an Ethernet network.
Sample Rate Converter
Ideal for the transfer of digital audio between different digital equipment, the RB-SC1 sample rate converter standardises the sample rate of a digital audio signal to one of 32kHz, 44.1kHz, 48kHz or 96kHz, or to a synchronising input.
AM Radio Capture PCle Card (6 to 32 Channels)
The AM Radcap PCIe range of radio capture cards are designed for simultaneous recording of up to 32 radio stations.
8 Stereo Analogue Line Inputs & Outputs, AES67
The AVN-Portal series is a group of three powerful audio mix engine interfaces (AVN-PA8, AVN-PD8 & AVN-PM8) capable of audio routing, metering and equalisation.
8 Stereo Analogue Line Inputs/Outputs, AES67 Portal
The Sonifex PA8D portal is capable of audio routing, metering and equalisation.
Digital Silence Detection Unit
The RB-DSD1 digital silence detection unit works in a similar way to the Sonifex RB-SD1 analogue silence detection unit, but has AES/EBU, S/PDIF and TOSlink inputs and outputs instead of analogue inputs and output respectively.
8 Channel Silence Switcher
The RB-DSD8 8 channel silence switcher works in a similar way to the Sonifex RB-SD1 and RB-DSD1 but allows for 4 stereo channels of audio.
Studio On-Air Switcher
The RB-OA3 is a 1U rack-mount, unity gain on-air switcher, capable of switching three stereo pairs between three studios.
Desk Mount Panel
All of the Passive Packs, along with the CM-TBU and CM-TLL, can be mounted to the underside of a desk using the CM-MNT1 desk mount plate.
Professional Gooseneck Condenser Microphone
This is a professional gooseneck condenser microphone which has a back electret condenser element with an ultra-cardioid polar pattern.
Balanced to Unbalanced Audio Converter
This product allows the connection of a stereo balanced line input via RJ45 with StudioHub+™ pinout to a stereo unbalanced output on stereo phono connectors.
Balanced to Unbalanced Audio Converter
This product allows the connection of a stereo balanced line input via 2 x female XLRs to a stereo unbalanced output on phono connectors.
Unbalanced to Balanced Audio Converter
This product allows the connection of a stereo unbalanced line input on phono connectors to a balanced line output via a RJ45 with StudioHub+™ pinout.
Unbalanced to Balanced Audio Converter
This product allows the connection of a stereo unbalanced line input on phono connectors to a balanced line output via 2 x male XLRs.
6-Channel Headphone Amplifier
The ROLLS RA62c is a six-channel headphone/earphone amplifier for professional audio monitoring.
Single 3 Way Passive Microphone Splitter
The CM-MS3 is a passive “one-to-three” splitter housed in a small but robust aluminium box.
Line level audio driver/conditioner c/w rackmount kit
The Alice LinePak MKII is a dual balanced-input to balanced-output amplifier with variable gain via accessible multi-turn pre-sets on the front panel.
Stereo to dual output mono unit c/w rackmount kit
The Alice MonoPAK MKII produces a fully buffered balanced-line dual mono output from a balanced-line stereo input.
Balanced input to unbalanced output Converter
The Alice MatchPak MKII is a bi-directional stereo unit for interfacing unbalanced semi-pro equipment to professional balanced line-levels.
Dante to Analogue XLR Stereo Output
Dante input and stereo audio output on 2x 3-pin XLR connectors
Sonifex DIO Audiophile compact ‘plug and play’ interface
The Sonifex AVN–DIO06 is a Dante to AES3 digital input and output audio converter in the Sonifex DIO range of Dante input/output devices.
Dante I/O with AES3 digital audio I/O on BNC connectors
The Sonifex AVN–DIO07 is a Dante to AES-3id digital input and output audio converter in the Sonifex DIO range of Dante input/output devices.
Dante I/O with AES3 digital audio I/O on terminal block connector
The Sonifex AVN–DIO08 is a Dante to AES3 digital input and output audio converter in the Sonifex DIO range of Dante input/output devices.
Headphone Amp For Under Desk With Loop
A very useful headphone amp for studio environments.
Analogue XLR Stereo Input to Dante
Stereo audio input on 2 x 3-pin XLR connectors, and Dante output.
Stereo Audio Level Interface
The Aphex Model 124B Audio Level Interface is designed to allow use of -10dBV consumer hi-fi equipment with +4 or +8dBm professional/industrial/broadcast audio systems.
Single Stereo Unbalanced to Balanced Converter
The RB-UL1 is a single stereo unit for interfacing domestic or semi-professional unbalanced equipment, such as a CD player, to professional balanced line levels.
Dante to Headphone Output
The Sonifex AVN-DIO03 is Dante AoIP network-to-headphones converter in the Sonifex DIO range of Dante input/output devices.
Model 120B is a high performance audio distribution amplifier with a single high impedance input and four low impedance outputs, all electronically servo-balanced and designed to be as transparent as possible.
3-pin XLR microphone input with Dante output
The Sonifex AVN-DIO09 is a microphone input to Dante audio interface.
Dual Stereo Unbalanced to Balanced Converter
The RB-UL2 is a dual stereo unit for interfacing domestic or semi-professional unbalanced equipment to professional balanced line levels.
Unbalanced to Balanced Bi-Directional Converter
The RB-BL2 is a bi-directional stereo unit for interfacing domestic or semi-pro unbalanced equipment to professional balanced line levels, and vice-versa.
Single Microphone Amplifier
The RB-MA1 consists of a low noise microphone pre-amplifier for converting mic level signals to line level, or for driving long lines from microphones to mixing equipment.
Single Stereo to Mono Converter
The RB-SM1 converts a stereo input to a fully buffered and balanced mono line output, e.g. to supply cue in broadcast environments or to feed a mono PA system.
Dual Stereo RIAA Phono Amplifier
This record player preamp amplifies the small signal from your pick up cartridge and provides the necessary RIAA equalisation required for vinyl records, to match it to a line input of your mixer, or amplifier.
Dante I/O with stereo RCA I/P and stereo RCA O/P
The Sonifex AVN–DIO04 is a Dante to analog phono stereo input & output converter in the Sonifex DIO range of Dante input/output devices.
Dante I/O with stereo analogue I/O on terminal block connector
The Sonifex AVN–DIO05 is a Dante to analog terminal block input and output converter in the Sonifex DIO range of Dante input/output devices.
8-Channel A/D Converter
Model 141B is a plug & play, eight-channel ADAT to Analog converter with balanced outputs, each with its own output level trim.
Dual Stereo to Mono Converter
The RB-SM2 is a dual version of the RB-SM1, consisting of two independent converters which will produce two fully buffered and balanced mono line outputs from two stereo inputs.
Twin Mono or Stereo, Limiter
The RB-SL2 is a stereo, or twin independent mono, VCA limiter for use in news-rooms and other locations where the correct level into recording equipment is required.
Dual Microphone Amplifier
The RB-MA2 consists of two independent low-noise microphone pre-amplifiers for converting mic level signals to line level, or for driving long lines from microphones to processing equipment.
Stereo Line Isolation Unit
The RB-LI2 stereo line isolation unit is used to isolate audio signals from inter-area ground hum loops, which could be caused by equipment being powered by different mains power supplies, or different phases on the same supply.
Stereo Microphone and Line Level Limiter
The RB-ML2 is a stereo microphone and line level limiter. The unit is mainly used where assistance with level control is required, for protection of mixer inputs and to prevent distortion.
6 Way Stereo Distribution Amplifier
The RB-DA6 is a 1U rack-mount high performance 6 way stereo distribution amplifier for splitting a source into a number of different outputs.
Quad Stereo Unbalanced to Balanced Converter
The RB-UL4 is a 1U rack-mount quad stereo unit for interfacing domestic or semi-professional unbalanced equipment to professional balanced line levels.
Quad Stereo Balanced to Unbalanced Converter
The RB-LU4 is a 1U rack-mount quad stereo unit for interfacing professional balanced line levels to domestic or semi-pro unbalanced equipment.
Dual Stereo Bi-Directional Matching Converter
The RB-BL4 is a dual bi-directional stereo unit for interfacing domestic or semi-pro unbalanced equipment to professional balanced line levels, and vice versa.
6 Way Mono Passive Line Isolation Unit
The RB-PLI6 passive line isolation unit is used to isolate audio signals from inter-area ground hum loops, which could be caused by equipment being powered by different mains power supplies or phases on the same supply.
3-Way Light/ Power Controller
The RB-LC3 is a triple output switching unit for controlling external mains indicators.
AES/EBU Digital Distribution Amplifier
The RB-DDA6A digital distribution amplifier is used for distributing digital audio data in AES/EBU format, repeating both the audio data and the status information of the input whilst re-normalising to standard digital audio levels.It has a single XLR-3 female AES/EBU audio input which is distributed to 6 XLR-3 male AES/EBU outputs.
6 Way Stereo AES-3id Digital Audio Distribution Amplifier
The RB-DDA6A3 digital distribution amplifier is used for distributing AES-3id digital audio, repeating both the audio data and the status information of the input whilst re-normalising to standard digital audio levels. It has a single BNC AES-3id audio input which is distributed to 6 BNC AES-3id audio outputs.
6 Way Stereo S/PDIF Digital Distribution Amplifier
The RB-DDA6S digital distribution amplifier is similar to the RB-DDA6A except that it is used for distributing digital audio data in S/PDIF format.
6 Way Word Clock Distribution Amplifier
The RB-DDA6W word clock distribution amplifier distributes a word clock BNC input signal to 6 word clock BNC outputs re-conditioned.
Timecode Distribution Amplifier
19” rack-mounted timecode distribution amplifier, with six Neutrik audio outputs and six BNC outputs for PSC cameras and field audio mixers.
Audio distributor with 2 balanced and active inputs and 8 outputs, with independent volume controls.
Headphone Distribution Amplifier
Distributor and amplifier for headphones that can supply up to 12 headphones simultaneously with extreme power and audio fidelity.
6 Way Stereo Distribution Amplifier With Output Gain Control
The RB-DA6G is a 1U rack-mount high performance 6 way stereo distribution amplifier for splitting a source into a number of different outputs.
Dual Microphone Amplifier with Gain Controls
The RB-MA2G consists of two independent low-noise microphone pre-amplifiers with front panel level controls and metering, for converting microphone level signals to line level, or for driving long lines from microphones to mixing equipment.
USB Audio Interface
The UAX220-Mic USB Audio interface designed for broadcast and other demanding pro audio applications that require high quality audio acquisition of analog sources.
10 Input, 4 Output Analogue Preset Mixer
The RB-PMX4 is a high performance 10 mono input to 4 mono output pre-set mixer.
The pro recording studio standard Aphex 124A enjoys a longtime reputation as one of the world’s finest level interfaces.