The Telos Link solves the problem of interconnecting production intercom systems with dial-up telephone lines. Anyone with access to a telephone, even a cellular phone, can instantly and automatically be connected with your intercom. Digital auto-nulling hybrids on both the telephone and intercom audio paths allows connections to be made without the usual gain and feedback problems, while maintaining natural, full-duplex operation. The result is significantly improved communication capability.

An interface for RTS, ClearCom and other two-wire intercom systems is built in so that you can connect the Link to your intercom system simply as if it were another station. A front panel knob selects intercom channels.

A "wet" single-channel operation option is selectable from the front panel. In this mode, the Link provides power to one or two belt packs and functions as a stand-alone intercom system.

An auto-answer/auto-disconnect function is built in.

A function to alert listeners that a call is ringing in is standard. This is provided via the 20kHz "call light" signaling function, if available in your intercom system, or by audible tone signaling.

Monitor output is provided to hear the communications from the phone line.

A loop-through connection is provided for a phone set.

Link is fully remotable to allow incorporation into sophisticated systems.

Optional rack mount kits hold one or two units in a single rack height.

Note to four-wire users:

The Telos ONE digital telephone hybrid has two software versions for intercom applications. One version is used to connect phone lines to four-wire intercoms providing functions similar to those the Link offers for two-wire intercoms. Another Telos ONE version is used to interconnect a two-wire intercom system to a four-wire intercom.