| Specifications |
| 2 x Mic, 6 x Stereo Lines, 1 x Hybrid, 1 x On-Air Monitor |
| Phantom power 9-12V for Mic's |
| Balanced mic -75dBu/+25dBu, 150-200 Ohms |
| Balanced line -15dBu/+18dBu, 600 Ohm |
| Unbalanced line -15dBu/+12dBu, 15K Ohm |
| 2 x Stereo balanced, +4dBm, bus outputs PGM & REC 600 Ohm |
| 1 x Stereo unbalanced PGM aux output, 0dBm/10K Ohm |
| 2 x Stereo monitor outputs, muted |
| 2 x Stereo headphone outputs (control & studio), 600 Ohm |
| On-Air line out |
| On-Air signal output (on when mic fader is open) 12V at 0.15A |
| Cue monitor amplifier with internal speaker |
| 2 x stereo monitor outputs with muting relays |
| 0dBu for external amplifiers. It manages active speakers for PC |
|
4-band mic equalizer with in/out switch +15dB/-15dB
|
| 80Hz top flat curve, 160Hz bell shaped, 5Khz bell shaped, 10Khz top flat |
| Low disortion mic processor with in/out switch, 20dB max compression, |
| fast attack; <10ms, Threshold = 0VU |
| <2dB output increase for 15dB mic overload |
| +24dBu max level at PGM output / 10K |
| 20=-20,000Hz +/-0.5dB (Line or Mic to PGM) |
| Mic input, EIN = -30dBu/150 Ohm |
| From Line input, >90dBa |
| PGM-REC >65dBa |
| From Line to PGM out <0.05% THD |
| Below 0.2dB error L/R in fader range 0 - 40dB |
| 1-line hybrid 330-3400Hz, >40dB rejection |
| Line Send with bandpass filter to improve rejection |
| Audio limiter for send signal, Priority 12dB attenuator for clean on-air |
| speaker voice, Front panel balance adjustment |
| Input (mix minus) & 1 output for external hybrid system |
| Level 0dBu / 10K Ohms |
| Talkback mic with audio limiter, PZM type |
| Stereo LED bar-graph for PGM bus |
| LED level display for REC bus |
| LED compression level display |
| External switching power supply, 90-240V AC in & 28V DC out |
| 425W x 25-50 sloping front panel (mm) |