Solidyne 562 Audio Processor
Features | Overview | Specifications | FAQ | Images | Manual | Software

Back



 

Specifications

Analog Input
600/10 K balanced XLR 50 dB CM Rejection 20-15 Khz. Input level selected by software in 1 dB steps.
Sigma-Delta converters 24 bits / 192 Khz
Digital Input
Optional AES-3 digital balanced input Z=110 ohms. Automatic selection of 32, 44,1, 48 & 96 Khz with sample rate converter (128 dB Dynamic Range, -117 dB THD) to avoid jitter
Analog Output
600 balanced XLR, output level + 4 dBu
Sigma-Delta converters 24 bits / 192 Khz
Digital Output
Optional AES-3 digital balanced output, Z=110 ohms FS=32/44.1/48 Khz; Standart=48 Khz
MPX Output
From 2 vpp to 5.5 vpp in 15 steps selected by software from LCD screen
Processing Technology DSP (Digital Signal Processing)
Total CPU power 2.700 MIPS
MPX Post-Processing SuperModulation exclusive Solidyne technology, at 608 Khz oversampling. Fast clipper DC-10 Mhz wideband channel to avoid audible artifacts
Frequency Response
20-15.000 Hz +/-0.25 dB. Flat mode XLR out or digital AES-3 Out. Output without pre-emphasis
Harmonic Distortion (THD)
THD below 0.005 % (30-15 Khz, Flat Mode)
Noise
Dynamic Range= 95 dBA
Stereo Separation
75 dBA @ 30-15.000 Hz
Subsonic Filter
Chebyshev FC=20 Hz; 25 dB rejection at 10 Hz
Asymmetry Canceling
Phase processing technology with Kahan-Bonello algorithms. Cancelling Factor=8:1
Linear Expander
Range=20 dB Attack time < 1 mS. Release: 200mS
Gated Wide-band AGC
Range=30 dB. Attack / Release time & Treshold controlled from LCD screen
Multiband Compressors
DSP controlled by software. Five Bands, Crossover= 24dB/oct Max compression = 30dB. Slope = 10:1
Compressors Attack/Release Time
Software controlled by user from LCD screen. Attack and Release controlled by separate.
IM Canceled Clipper
IM canceling factor : greater than 30 dB below 250 Hz
 
Fast Clipper Absolutely alias free using DC-10 Mhz bandwidth channel
Audio Equalizer
Four bands audio equalizer with 20 dB range at the output of multiband compressors
Space Effects Processing 562 has the SRS Labs, California, license for SRS WOW technology (3D space, super bass, sound elevation)
Super Modulation MPX processing for stereo interleaving, allows for 150% L & R audio level at 100% modulation
Low pass filter
15 Khz digital lowpass FIR filter, 50 dB rejection at 19 Khz
Storage of Preset Settings
30 programs that can be changed on-air from PC computer using the 562 serial port
RS-232 PC control
RS232 seriel port. It can be connected to USB bus with optional external adapter. Optional Ethernet bus connection
Ethernet conection Optional RJ45 port, for direct connection to Ethernet. Allows the 562dsp to be remote controlled by direct connection to Internet modem.
RDS Encoder
Optional built in RDS encoder
AM & FM compatible
The user is able to insert two socket mounted ICs to change betwen AM and FM modes.
Stereo coder is a separate module
LCD Display
Blue color, LCD display with backlight. Graphic type
Resolution 240 x 64
Processing Bands and stages
Five processing bands
Nine processing stages
Power
90/127V and 190/230V; 50/60 Hz, selectable from rear panel
Dimensions
483 mm Wide 240 mm Deep, 88 mm High

 


Postal Address: Transmitters 'R' Us, Transmitter House, 35, Brompton Square, London, SW3 2AE, UK.
Tel: (+44)-(0)-207 589 3868 --- Mobile: (+44)-(0)-7971 053067 --- Fax: (+44)-(0)-208 343 8739
Email: sales@transmittersrus.com --- Web: Http://www.transmittersrus.com