RVR Elettronica Blue Digital 20W TV Transmitter

BLUE DIGITAL supports DVB-T/H or ATSC (8VSB) full mode implementation. The version may change depending upon demand.
Very high modulation performance (MER, signal stability, shoulder level, low phase noise).
MFN and SFN operation.
Powerful Linear and Non-linear digital pre-correction.
Configuration software offers a simple, intuitive JAVA Graphic User Interface by USB connection.
Pressure encoder provides great accessibility for user/device interaction, resulting in extreme ease of use.
Total control thanks to microprocessor easily programmed from menu or via RS232 with all key parameters displayed on a wide-screen LCD.
Expansion slots to increase equipment potentiality: up to 2 Slot to add ASI inputs and 4 Slot to add Euro Cards like Pre-driver or Driver options.
TCP/IP and SNMP are available for optional telemetry control.
Option: Built-in GPS Receiver.
Compact and rugged, stainless steel chassis, in 2 rack unit only.

Specifications
Standards
DVB	ATSC
EN 300 744	A/53, A/54, A/64, SMPTE-310M
DVB-ASI	EN 50083-9, ETSI TR 101 891
MPEG-TS	ISO/IEC 13818-1
MPEG-TS Input
2 x DVB-ASI or SMPTE-310M connectors
Automatic input switching for redundancy
188/204 bytes	188 bytes, 19.392658 Mbits/sec
Bit rate adaption
PCR restampting
Output
VHF 1-111 Band (50 Ohm)	VHF from 57MHz to 85MHz, from 177MHz to 213MHz (50 Ohm)
UHF from 470MHz to 860MHz (50 Ohm)	UHF from 473MHz to 887MHz (50 Ohm)
Output power	Up to 20W
Option	10Mhz output
Clock and Synchronization
High quality internal clock OCXO
10MHz 0.1ppm internal or external reference
Internal GPS for 1 PPS reference
Modulation
All DVB-T & DVB-H modes supported (hierarchical and nonhierarchical)	8 levels VSB trellis for ATSC transmission
5, 6, 7 or 8MHz channel bandwidth	6MHz channel bandwidth
MFS or SFN network operation
High performance MER
Digital Pre-Correction
Non-linear and linear digital pre-correction	Non-linear pre-correction circuit over a 15MHz bandwidth
Non-linear pre-correction over a 20MHz bandwidth	Linear pre-correction circuits to compensate output filter characteristics
Graphic settings on JAVA interface pages
Control and Monitoring
RJ45 (LAN), IRDA, RS232 & RS485, USB
Power Supply
Voltage	110-130V AC, 200-250V AC
Frequency	50-60Hz
Physical
Dimensions	483 (19") W x 88 (3.46")H x 503 (19.08"), mm
Options
Built-in GPS professional receiver
Telemetry control through TCP-IP and SNMP

PRODUCTS ACCESSORIES

BKL/7 TV Broadcast Antenna BKL/7 Log Periodic Antenna