86-110MHz
0.25 dB insertion loss maximum; 0.20 dB typical.
-22dB return loss maximum; -25dB typical.
Metal clad silver teflon caps from Semco.
#8 Awg Inductors.
-60dB rejection at 176MHz. That's the 1st harmonic of 88MHz
Size: 3 inches wide x 7 inches long.
Each unit is sweep tested on an HP 8753D network analyzer to meet our specifications
.25dB maximum insertion loss, better than -20dB return loss from 88-108MHz. Maximum insertion loss occurs at 108MHz.
RF connectors are not included. A coax can be soldered directly or the filter can be ordered with our Aluminum Enclosure
Mounts to customers chassis with 8-32 screws. 3/8 inch PCB standoffs or washers are required between the bottom of the PCB and chassis to prevent shorting of the inductors. Installing the filter in a metal chassis is suggested to provide shielding and good thermal conductivity in high power installations.
This low pass filter is intended for use in 50 ohm systems only.