The MCE 60 has been designed for unobtrusive miking of speech and vocals. Therefore, it is suitable for film, TV and theatre applications. It's omni-directional polar pattern reduces popping and it's construction eliminates handling noise. The microphone attaches via a microphone clip to clothing. due to it's small size, it can easily be concealed in the hair or in make-up for theatre applications.

In addition to the use with amplifiers and recorders, this microphone is well sorted to the connection to beyer-dynamics wireless system's.For all your interviewing and broadcasting needs, minus the unwanted environmental noise. Up-close and personal, without interference

Omnidirectional polar pattern
High output level
Rugged construction
Slime line design
Battery powering

The MCE 58 condenser microphone has been specially developed for interviewing and broadcasting. Its unbalanced output supplies a very high level which allows direct connection to mobile DAT and MD-machines. The elasticated suspension of the transducer element eliminates unwanted handling noise and built-in active filters suppress unwanted low frequency noise such as traffic rumble.

The MCE 58 has a frequency response curve which has been optimised for excellent intelligibility of speech. The non-glare Nextel surface is scratch-resistant and will withstand the rough use often associated with news gathering events.

Specifications
Transducer type	Condenser (back electret)
Operating Principal	Pressure
Frequeny Response	40 - 20,000 Hz
Polar Pattern	omnidirectional
Open circuit voltage at 1 kHz	4 mV/Pa
EIA sensitivity rating	370 ohms (unbalanced)
Nominal impedance	2 k ohms
Load impedance	132 dB
Max. SPL at 1 kHz	60 dB
Signal-to-noise-ratio rel. to 1 Pa	26 dB
A-weighted equivalent SPL	1.5 V battery (type AA/LR 6)
Supply voltage	20 mA
Current Consumption	80 hours
Operating time with battery	3-pin XLR; 1 and 3 = ground, 2 = signal +
Male connector	260 mm
Length	25 mm
Shaft diameter	45 mm
Head diameter	200 g

Specifications
Transducer type	Condenser (back electret)
Operating Principal	Pressure
Frequeny Response	25 - 20,000 Hz
Polar Pattern	omnidirectional
Open circuit voltage at 1 kHz	30 mV/Pa
EIA sensitivity rating	370 ohms (unbalanced)
Nominal impedance	<200 ohms
Load impedance	>1 Kohm
Max. SPL at 1 kHz	120 dB
Signal-to-noise-ratio rel. to 1 Pa	Approx 60 dB
A-weighted equivalent SPL	Approx 26dB
Supply voltage	1.5 to 10V
Current Consumption	80 hours
Operating time with battery	3-pin XLR; 1 and 3 = ground, 2 = signal +
Male connector	260 mm
Length	7 mm
Shaft diameter	12.3 mm
Head diameter	200 g